Tag: G3SVK

HF Easter Weekend

During the long Easter weekend members of the SNBCG came together for a radio weekend. Over the course of the weekend, we had two HF stations set up one on 7 MHz and the other roaming between 1.8 and 21 Mhz depending on propagation.

 

I decided this weekend I would like to try a 1/4 wave vertical on 7 MHz and utilise my recently purchased push together plastic poles. The push together green poles are often sold at radio rallies and come in packs of 5 (each pole 1.3 meters) to give you an overall height of 6.5 meters. Using two packs of the poles I could achieve the required 10 meters.

 

Chris G8OCV had made some supporting guy rings, these provided anchor points for the guy lines at approximately 4 and 8 meters. The first attempt didn’t quite go to plan, it simply wasn’t possible to walk up the 10m pole, as we found out when we exceed the bend radius of one of the poles. Lesson learned it didn’t make any difference as the fracture was in the joining section that was simply moved to the first section. In the end, we used 9 poles, giving us a total height of 11 meters with a simple wire running down the side for the radiator.

I also cut 6 radials, each around 10 meters in length and the antenna was mounted at the base of a wire fence. The earthing system included the 6 radials and the wire fence, and this provided a reasonable match around 1.5:1 at 7.150 MHz. It would have been much easier to use a push-up fishing/roach style pole but experience has told me these can be tricky to keep up without guying and some tape over the joints. I wanted to use the linear amplifier this weekend, and the prospect of the pole moving in the wind and or falling down made up my mind to use the push together poles as the first choice.

The antenna was fed with coax with a 1:1 balun (FT240-31) at its base to stop the coax radiating, and this needed to be capable of high power. John M0UKD made up the balun a couple of years ago after sourcing the parts online. I understand the RG400 coax can be quite expensive and difficult to obtain in small quantities, although any PTFE coax will suffice.

 

The antenna provided reliable service all weekend, and with the addition of 400w provided over 200 contacts in 40 DXCC countries. The highlight for me was working DX stations later in the evening, these included the USA, Chile, Mozambique, Guinea-Bissau, Israel, UAE, Armenia and Asiatic Russia.

George M1GEO and Fred G3SVK operated the other station, George chased some good DX and Fred worked several hundred stations as GB0SNB in his mode of choice CW.

Dave M0YOL worked some data modes using his portable setup.

We also had time for a BBQ and some excellent curries provided by Fred G3SVK. It was nice to see Camb Hams members Geoff G0DDX and Linda G0TPX, and LEFARS members Derek M0XDC, Dave M0MBD. Peter Onion G0DZB also joined us for the afternoon, making the most of the good weather for a ride on his motorbike.

 

SNBCG Christmas Dinner

Members of the newly formed Secret Nuclear Bunker Contest Group met for its inaugural Christmas dinner this weekend. The event was well attended by 10 members, enjoying a traditional Christmas dinner, crackers and unavoidable cracker jokes.

Pre meal drinks, from left to right Chris G8OCV, Dave G7UVW, Bill G0BOF and George M1GEO.

Left Kevin M0TBX and Dave M0YOW enjoying a beer.

23707160995_ed9abe7ca3_k

23624691541_ce14d99e96_k

 

 

 

 

 

 

Thanks to Peter G0IAP for organising the event and to everyone that attended. The SNBCG is now affiliated to the RSGB and holds the club call M0SNB and permanent special event call GB0SNB so look out for us in contests in 2016.

2015-12-13

Left (front to back) Bill G0BOF, Chris G8OCV, Dave M0TAZ, Fred G3SVK, Diane

Right (front to back) Dave M0YOL, George M1GEO, Dave G7UVW, Kevin M0TBX, Peter G0IPA

23411519480_5849d13970_k

23079066414_57f1b77e88_k

23079066564_99ec418902_k

 

 

 

 

 

 

 

 

 

 

 

 

From left to right Dave G7UVW, Chris G8OCV, Fred G3SVK and Diane