Icom 7100 and WSPR 2.12

Option 1 Using WSJT-X

WSJT-X supports JT65, JT9, WSPR and JT4. This may provide better compatibility than WSPR v2.12 but essentially both can work. WSJT-X has the advantage of supporting multiple modes, and also you can set the radio control to “Ham Radio Deluxe” and let HRD provide the CAT control.

WSJT-X can be downloaded here, and provides native support for many newer radios.

Option 2 Using WSPR 2.12

I was looking on-line for resources on how to configure the Icom 7100 for use with WSPR  v2.12. The WSPR software can be downloaded free from K1JT website and runs under most version of Windows. I currently use Windows 8.1.

The problem is the Icom 7100 is not currently supported for CAT in this older software, and I was trying to get online with WSPR on 70 MHz in time for the sporadic E season.

I read online that various people had some success, but I was unable to find all of the setting on one page. After trying various options I can confirm its now working, so to assist others here is the configuration that worked for me, and I hope for you.

WSPR 2.12 Set up, firstly looking in the station parameters, set the following. You will need to select your correct COM port, and ensure CAT is ticked. Set the radio to Icom 7000 and data rate to 19200, data bits to 8, stop bits to 1. I setup the handshake to be “hardware”
Station setup

I also needed to make some changed to the radio, under SET, Connection, CIV I changed the radio address to CI-V to 70h, and checked the CI-V baud rate was 19200.

Icom setup

 

 

Using these setting I was able to connect to the radio, and PTT via CAT. This enabled me to run WSPR on 70 MHz. Good luck, hopefully this is helpful if you are trying to connect this fine radio to WSPR and hope to see you on the bands soon. 73 Dave M0TAZ.

 

5 Comments

Add a Comment
  1. Richard Stanley

    The most recent betas of wsjt-x support the IC-7100 and do wspr2.
    I run it here with our ic-7100.
    Not sure when it will be an alpha release but I can give easy to follow instructions for how to build it from the sources if anyone is interested.

    Richard M0CLZ

    1. Richard ,

      Please send me the info for the Icom 7100 using WSJT-X.

      Thanks

      1. If you download the latest version of WSJT it has support for the Icom 7100 as a native radio. 73 Dave M0TAZ

  2. Please send me the info you have to the ic 7100 setup with the different types of software. Thanks KD4FZY 73’s

    1. Hi Jerry, what software are you trying to run. I tend to run HRD, WSPR-X, FSQ mostly and the process explained for making the radio look like the Icom 7000 works if the program has support for that radio. 73 Dave

Leave a Reply to Dave M0TAZ Cancel reply

Your email address will not be published.

49 − 40 =

This site uses Akismet to reduce spam. Learn how your comment data is processed.